80 Carter Drive
Guilford, CT 06437-2116
Phone: (203) 453-5200
Tech Line: (203) 458-0542
Fax: (203) 453-6906

Copyright © 2002 Moroso Performance Products, Inc.
All Rights Reserved.

REAR AXLE HOUSINGS

DRAGSTER REAR END HOUSING

No. C9003 (Chrome Moly), No. C9004 (Mild Steel)
No. C9003 (Chrome Moly), No. C9004 (Mild Steel)
No. C9003 (Chrome Moly), No. C9004 (Mild Steel)
No. C9003 (Chrome Moly), No. C9004 (Mild Steel)
No. C9009 (Chrome Moly) C9010 (Mild Steel)
No. C9009 (Chrome Moly) C9010 (Mild Steel)
No. C9029 (Chrome Moly) No. C9030 (Mild Steel)
No. C9029 (Chrome Moly) No. C9030 (Mild Steel)
No. C9029 (Chrome Moly) No. C9030 (Mild Steel)
No. C9029 (Chrome Moly) No. C9030 (Mild Steel)

  • Stronger .125" thick sheet metal shell is more accurately produced than any other rear end housings on the market
  • Designed with overlapping joints that provide two weld seams to greatly improve strength compared to butt-welded housing shells
  • Housing comes in standard 26.00" flange to flange width
  • Withstands advanced E.T. applications: internal bulkheads stiffen the shell to the face plates preventing movement and adding strength around the housing mounting brackets
  • 3/8" thick face plate is CNC machined after the housing is welded to ensure proper axle alignment to center section
  • Includes a –6 AN drain plug, 1/8" NPT fitting for a vent, and an aluminum o-ring filler cap
  • All housings have machined symmetrical housing ends
  • Carrier Stud Kit No. C9006 available separately

No.Description/Application
C9003 Dragster Housing, Drag, Chrome Moly
C9004 Dragster Housing, Drag, Mild Steel
C9009 Dragster Housing, Hard Tail, Chrome Moly
C9010 Dragster Housing, Hard Tail, Mild Steel
C9029 Dragster Housing, 4-Link, Chrome Moly
C9030 Dragster Housing, 4-Link, Mild Steel
PART # REPLACEMENT PART
C9085 Rear End Cap, Black Anodized with Logo
<<

REAR END HOUSING

No. C9110
No. C9110

Fits: 1979-'04 Mustang

  • Bolt-in replacement for Ford Mustangs, 1979-'04
  • Consists of a fabricated 9" Ford rear end housing with 3.150" bearing large Ford housing ends, complete with brackets that will bolt up to factory mounting locations and work with adjustable control arm mounts
  • 9" housing is straighter and stronger than the factory piece
  • Can withstand the demands and can take the abuse of high performance applications

No.Description/Application
C9110 Rear End Housing
PART # AVAILABLE OPTION
C9129 Quad Shock Mount for Rear End Housing Part No. C9110
<<

FABRICATED REAR AXLE HOUSINGS

No. C9200 Front View
No. C9200 Front View
No. C9200 Rear View
No. C9200 Rear View
Custom Housings are available on request. Call our Custom Dept. at (203) 453-6571.

  • Triangulated design offers increased strength over three piece stock housings
  • CAD designed and CNC manufactured in-house
  • Offered in 4130 Chrome Moly or Mild Steel
  • Exterior welds ground smooth to eliminate stress risers
  • 1/4" face plate for added strength
  • Face plates accepts 3/8" press-in studs
  • Includes drain plug, filler plug, and breather plug
  • Carrier Stud Kit No. C9006 available separately

No.Description/Application
C9100 Full Bodied Car; with cut-to-length 3" axle tubes; Chrome Moly; 60.75" Overall length (Mild Steel Tubes)
C9200 Full Bodied Car; with cut-to-length 3" axle tubes; Mild Steel; 60.75" Overall length
<<

Return To Menu